PB Config??

Butch

Senior Member
Joined
Nov 1, 2003
Likes
0
#1
I have no kind of a config file that I see on my server.

Is there a way to beef up my PB by using a config that checks more often and has a stronger back bone to stop cheaters?

My server is a rented UO server that I also set to run COD2. I am looking at doing this on my UO server first.

I would like any information that may help me setup PB for more protection.

Thanks,
Butch
 

Butch

Senior Member
Joined
Nov 1, 2003
Likes
0
#3
I have "Streamed" my server before using Punksbusted and was looking for some way I could put a config of my own in the PB folder.

Punksbusted running live was alright I just was looking for a differant way I couls set up my PB on my server.

Thanks,
Butch
 
Joined
Nov 10, 2007
Likes
0
#5
advanced countermeasures

Old Dog is correct.
I stream with PsB and PBbans and although both are good, I have many more busts with PBBans over PsB. Plus with PsB you have to manually update your MBL. The MBI via PBBans hub is live and automatic. I would suggest you look into streaming with PBBans.
If you don't want to stream, one solution is to get a copy of the MBL from PunksBusted (although it will be about a month old) but using a month old pbbans.dat file is better than nothing.
We are not permitted to share the md5toolset configuration or their suggested pbsv.cfg file with non-streaming general public, it is in violation of their terms of service
 

OldDog

Administrator Emeritus
Joined
Oct 31, 2003
Likes
0
Location
Essex Junction, Vermont
#7
Old Dog is correct.
I stream with PsB and PBbans and although both are good, I have many more busts with PBBans over PsB. Plus with PsB you have to manually update your MBL. The MBI via PBBans hub is live and automatic. I would suggest you look into streaming with PBBans.
If you don't want to stream, one solution is to get a copy of the MBL from PunksBusted (although it will be about a month old) but using a month old pbbans.dat file is better than nothing.
We are not permitted to share the md5toolset configuration or their suggested pbsv.cfg file with non-streaming general public, it is in violation of their terms of service
I stream to both as well. But, with PsB you don't have to manually update the MBL. AutoMBL can take care of that quite easily. I have scheduled it to run once per day, and that seems perfectly adequate. PBBans is closer to real-time (live), but, frankly, I never saw the need. Still, like Diva, I stream to both.
 
Top Bottom